MX6CPOE
2-Way 6" POE High-Fidelity Ceiling SpeakerThe MX6CPOE is a PoE-enabled version of the MX6C in-ceiling loudspeaker, designed for network-centric audio systems using Dante® and PoE distribution. By integrating a high-performance Class-D amplifier directly onto the loudspeaker, it allows audio, power, and control to be delivered via a single Ethernet connection.
This system is optimized for venues requiring flexible zoning and rapid reconfiguration. Using Dante Controller or an external DSP, users can manage one-to-one loudspeaker zoning, allowing layouts to adapt without physical re-cabling.
FLEXIBLE OUTPUT CONFIGURATION
The MX6CPOE can power up to three additional downstream (slave) speakers across two discrete
Dante audio streams:
Output 1 (Stream A): Drives the master MX6CPOE and can accommodate one additional MX6C loudspeaker. Both speakers share the same Dante audio feed.
Output 2 (Stream B): Powered by an independent Dante audio feed, this output can drive up to two additional MX6C loudspeakers. Both downstream speakers on this output receive the same signal.
Key Specifications:
-
Transducers: 1″ HF & 6″ LF
-
Dispersion: 130°
-
Network: RJ45 Input for Dante®/AES67
-
Power: Supports IEEE 802.3bt (Type 4, Class 8) PoE for up to 90W of Power
-
Grilles: Black and White
SPECIFICATIONS
| COLOURS / MODELS |
|
||||
| FREQUENCY RESPONSE (-6 dB) | 70Hz to 20kHz | ||||
| MAXIMUM SPL @ 1 m | 109dB | ||||
| POWER HANDLING (RMS/PEAK) | 75W / 150W | ||||
| TRANSDUCERS | HF: 25mm (1") Dome Tweeter / LF: 152mm (6") Woofer | ||||
| DISPERSION (H° x V°) | 130° Conical | ||||
| DIRECTIVITY INDEX | 3dB | ||||
| CONNECTIONS |
|
||||
| DIMENSIONS (W x D) | 288 x 220mm (11.3" x 8.7") | ||||
| DANTE STATUS LEDS | SYS, SNC, CTRL, ERR | ||||
| POE STATUS LEDS | Type 2, Type 3, Type 4, ON | ||||
| CUT-OUT DIAMETER | 254mm (10") | ||||
| WEIGHT | 3.6kg (8lb) | ||||
| RIGGING POINTS | Safety cable attachment point | ||||
| CABINET MATERIAL & FINISH | Fire-resistant aluminium backcan with black powder-coated finish | ||||
| GRILLE MATERIAL & FINISH | Removable rimless magnetic grille constructed from powder-coated steel | ||||
| SHIPPING DIMENSIONS (H x W x D) | 275 x 365 x 365mm (10.8" x 14.4" x 14.4") | ||||
| SHIPPING WEIGHT | 4.6kg (10.1lb) | ||||
| ACCESSORIES (INCLUDED) | Grille, Cut out Tool, Spare Locking Tab (LTMXC) | ||||
| ACCESSORIES (AVAILABLE SEPARATELY) | Ceiling Tile Rail (QRAIL), Ceiling Ring (QRING6) & Locking Tab (LTMXC) |
INSTALLATION ACCESSORIES
Q Rail
Ceiling support rail for MX speakers where ceiling tiles can’t support weight; used with Q Ring.
Q Ring6
Support ring for MX6C/QTC2080i, used with Q Rail to ensure stable ceiling tile installations.
