Extended range bass, and easy to conceal. The MXS10i coupled with MX or MXC loudspeakers provides a complete, full-range audio solution. One which architects and venue designers have long been waiting for.
The MXS10i is a suitable low/mid sound pressure level subwoofer for use in permanent installation environments. It is ideal as a bass extension to a distributed background music system, or as a multi-unit system in a bar or music venue.
The ‘punchy’, yet smooth performance of the MXS10i is delivered via the custom 10” 50mm Voice Coil - Dual Magnet Woofer. A decision early on in the design phase was made to build a custom driver to suit the application specific requirements of the MXS10i…the result speaks for itself.
This unique band-pass subwoofer is specifically tuned for music playback in small to medium size venues. However, despite its small size, the MXS10i delivers high output and efficiency. The tuning and performance will match or exceed many physically larger systems.
An outward facing driver is located under the cabinet to acoustically pressure load the unit onto a floor/wall, or ceiling installation surface; creating an 'acoustic chamber' effect. This extends the workable frequency range of the subwoofer, and gives a flatter and more natural response.
An ultra-durable and scratch resistant Polyurea coating is applied to a plywood cabinet giving the MXs10i superior protection in high humidity and commercial environments.
Integrating discrete full range sound is a challenge for architects and venue designers. Everything about the design and functionality of the MXS10i marries high performance, clean audio reproduction with varying architectural designs. Whether a new venue or an existing one, the MXS10i is easily integrated and perfectly at home.
When installed with the optional MPS10 installation bracket, the MXS10i can be installed on walls, ceilings, or anywhere a venue designer wishes for concealed placement.
The omni-directional coverage of the MXS10i allows the it to be placed on a ceiling, or under furniture for complete area coverage; while remaining discrete or invisible.
The physical dimensions and aspect ratios of the MXS10i were chosen specifically to allow it to virtually disappear into a venue. Floor mounted under furniture, in a false ceiling space, or vertically mounted to a wall are just some examples of how the MXS10i can vanish into a venue.
Quest offers many suitable amplifier solutions for the MXS10i. Whether it be a Q1K, QM1000P Sub-Satellite, or a QA1004/2004 amplifier. The capability of 300Wrms and a suitable Low Pass Filter, are the only two requirements an MXS10i needs to operate at full potential.Top
|Max SPL *calculated||118dBSPL|
|Sensitivity 1W @ 1m - 60Hz||96dB|
|Frequency Response||-9dB 44Hz – 90Hz|
|Power Handling||300W RMS|
|Driver||10" 50mm Voice Coil Dual Spider, Dual Magnet Woofer.|
|Connectivity||Captive Screw Terminal Plug (In/Thru)|
|Cabinet Construction||Polyurea coated plywood|
|Dimensions *L x W x H||500 x 470 x 256mm|
|Net Weight||15.1 kg|
|Shipping Weight||15.5 kg|
|Shipping Dimensions||520 x 520 x 320mm|
|* Quest Engineering reserves the right to make changes in specifications, or products without prior notice.
** The figures shown above are ‘real world’, usable specifications and are conservative as a result. Quest Engineering does not believe in portraying misleading or exaggerated specifications.
Phone: +61 (0) 3 8373 6868Address: 86 Derby Street, Pascoe Vale VIC 3054 Australia
Postal: P.O. Box 1071 Tullamarine VIC 3044 Australia
Feel free to get in touch with your nearest distributor. We’re always happy to hear from people interested in our products and we’re always ready to help you with your next project. You can find your nearest Quest distributor on the map below.
For general enquiries email Quest Directly using the enquiry form below.